Plumbing Hardware
Plumbing Hardware
At Cambia-Distribution, we believe in providing well-built, long-lasting and reliable plumbing hardware for our customers. Cambia is proud to facilitate T&S Brass products – who continue to offer sustainable options by creating industry-leading, and water efficient products including but not limited to: metering faucets, ceramic cartridges and low-flow pre rinse spray valves.
At Cambia-Distribution, we believe in providing well-built, long-lasting and reliable plumbing hardware for our customers. Cambia is proud to facilitate T&S Brass products – who continue to offer sustainable options by creating industry-leading, and water efficient products including but not limited to: metering faucets, ceramic cartridges and low-flow pre rinse spray valves.
-
T&S Pre-Rinse Overhead Spring 888-45, made of chrome-plated steel and measuring 20-5/16" long with a country origin in China, is used by many end users for its sturdy structure.
-
Quarter turn, Eterna compression cartridge, RTC (HOT) with spring check, lever handle, red index and screw. Fits all T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Quarter turn, Eterna compression cartridge, LTC (COLD) with spring check, lever handle, blue index and screw. Fits all newer T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
8" wall mount mixing faucet pre-rinse unit with polished chrome body.- 18" riser
- 44" flexible stainless steel hose
- Heat resistant handle
- 1.15 GPM spray valve
- Ceramic cartridges with check valves
- Lever handles
- 1/2" NPT female inlets
- Spray valve holder
- Overhead spring
- 6" adjustable wall bracket.
-
This waste drain twist handle is made out of thermoplastic and stainless steel to withstand corrosion. -
Out of stock
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet with 18" 65X nozzle (with stream regulator outlet), compression cartridge with spring check, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
This chrome-plated metal lever handle is in the red index (hot) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This chrome-plated metal lever handle is in the blue index (cold) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
The T&S 7861-45 gray rubber bumper is an ideal replacement for the one that came with B-0107 spray valves. If you notice tears forming in the spray valve bumper, it's a good idea to replace it. Otherwise your plates and glassware could be damaged during cleaning. -
Out of stock
This deck mount double pantry faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few key features include:
- Chrome-plate brass body
- 18"swing nozzle with stream regulator outlet (65x)
- Compression cartridge with spring check
- Lever handle
- 18" flexible stainless steel supply hoses
- 1/2″ NPSM male inlet
-
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, 18" flexible stainless steel supply hoses, Â and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this concealed mixing faucet. Chrome-plate brass body, compression cartridges with spring checks, 4-arm handles, 3/8" NPT female inlets and outlet Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
Outstanding quality and craftsmanship is evident in this 8" wall mount mixing faucet. Chrome-plate brass body, 12" swing nozzle, ceramic cartridge faucets, lever handles, 1/2" NPT female inlets. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Made of chrome-plated brass, this 6″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372.
