Plumbing Hardware
Plumbing Hardware
At Cambia-Distribution, we believe in providing well-built, long-lasting and reliable plumbing hardware for our customers. Cambia is proud to facilitate T&S Brass products – who continue to offer sustainable options by creating industry-leading, and water efficient products including but not limited to: metering faucets, ceramic cartridges and low-flow pre rinse spray valves.
At Cambia-Distribution, we believe in providing well-built, long-lasting and reliable plumbing hardware for our customers. Cambia is proud to facilitate T&S Brass products – who continue to offer sustainable options by creating industry-leading, and water efficient products including but not limited to: metering faucets, ceramic cartridges and low-flow pre rinse spray valves.
-
This 6” wall bracket has a polished brass body, and screws are included for mounting purposes. Fits 3/8" pipe and has a 2 1/4" wall flange, made in China. -
Out of stock
Made of chrome-plated brass, this 18" swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372.
-
68" flexible stainless steel hose with heat resistant handle, 3/4-14 UN female outlet and 3/4-14 UN female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Chrome-plated brass 2" NPT female x 1 1/2" NPT male adapter for rotary waste valve.
-
In industrial kitchens, the B-107C low flow spray valve is designed for heavy-duty use—with a 3/4-14 UN male inlet, a hold down ring and shuts off when handle is released. Made to last, this product has a polished chrome-plated brass body and a rubber bumper.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. EPAct 2005 compliant. -
Universal repair kit for 3" or 3 1/2" T&S waste valves with twist or lever handle. Included in Kit- Elastomer gaskets & washers
- O-rings
- Plastic bushing
- Stainless steel C-ring
-
This hand-held pot and kettle filler is made of chrome-plated brass and stainless steel for increased durability. Other features include:
- Automatic shut-off valve
- Heat resistant handle
- Hook nozzle
- 68" flexible hose
- 1/2" NPT male inlet.
-
Wall mount pot filler with chrome plated brass body, 18" double joint swing nozzle, on-off volume control outlet with insulated grip, 1/2" NPT female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
In industrial kitchens, the B-107 spray valve is designed for heavy-duty use— with a 1.15 GPM spray valve flow and a doe spray face. There is also a 3/4-14 UN male inlet, a hold down ring and shuts off when handle is released. Made to last, this product has a polished chrome-plated brass body and a rubber bumper.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. EPAct 2005 compliant. -
Out of stock
Pre-Rinse Unit: B-0113-CR-B | Single hole deck mount mixing faucet pre-rinse unit with polished chrome plated brass body- 24" riser
- 44" flexible stainless steel hose
- Heat resistant handle
- 1.15 GPM spray valve
- Ceramic cartridges with check valves
- Lever handles
- 18" flexible stainless steel supply hoses with 1/2" NPSM / 5/8" compression connections
- 6" adjustable wall bracket
- Spray valve holder
- Overhead spring
-
This rubber doe spray face has a 1.15 GPM spray valve flow and designed for the B-107 spray valve. Made in the USA. -
Made of chrome-plated brass, this 12″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
This stainless steel 3" flat strainer fits inside a 3 1/8" drain valve.
-
44" flexible stainless steel hose, chrome-plated brass 3/4-14 UN female outlet and inlet, and gray thermoplastic handle. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
44" flexible stainless steel hose, 7/8-20 UN female outlet and 3/4-14 UN female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Suitable for all T&S Faucets, this chrome-plated removable RTC Eterna insert is made to last with washer included Certified to NSF 61-Section 9 and NSF 372. -
Suitable for all T&S Faucets, this chrome-plated removable LTC Eterna insert is made to last with washer included. Certified to NSF 61-Section 9 and NSF 372. -
Out of stock
This add-on faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few features include:- Chrome-plate brass body
- 12″swing nozzle with stream regulator outlet
- Ceramic cartridge with check valve
- Lever handle
- 3/8" NPT male and female inlet
-
Standard-type T&S B-107 spray valves can be repaired with these parts to ensure GPM output accuracy.
Included in Kit:
- Valve stem
- Spring
- Washers
- Packing seal
Certified to NSF 61-Section 9 and NSF 372. 2019 DOE PRSV - Class II compliant.
-
Out of stock
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, 12″ swing nozzle (with stream regulator outlet), compression cartridge with spring check, 18" flexible stainless steel supply hoses, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
Made of chrome-plated brass, this 6″ elevated swing nozzle, has a height of 24-1/16", stream regulator outlet, and 1/2" NPSM male inlet to withstand any corrosion. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Polished chrome-plated 18" riser with 3/8" NPT male threads for T&S pre-rinse units. Certified to NSF 61-Section 9 and NSF 372. -
Made of chrome-plated brass, this 6″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Out of stock
Outstanding quality and craftsmanship is evident in this 8" wall mount mixing faucet. Chrome-plate brass body, 12" swing nozzle, ceramic cartridge faucets, lever handles, 1/2" NPT female inlets. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this concealed mixing faucet. Chrome-plate brass body, compression cartridges with spring checks, 4-arm handles, 3/8" NPT female inlets and outlet Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, 18" flexible stainless steel supply hoses, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
This deck mount double pantry faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few key features include:
- Chrome-plate brass body
- 18"swing nozzle with stream regulator outlet (65x)
- Compression cartridge with spring check
- Lever handle
- 18" flexible stainless steel supply hoses
- 1/2″ NPSM male inlet
-
The T&S 7861-45 gray rubber bumper is an ideal replacement for the one that came with B-0107 spray valves. If you notice tears forming in the spray valve bumper, it's a good idea to replace it. Otherwise your plates and glassware could be damaged during cleaning. -
This chrome-plated metal lever handle is in the blue index (cold) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This chrome-plated metal lever handle is in the red index (hot) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet with 18" 65X nozzle (with stream regulator outlet), compression cartridge with spring check, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
This waste drain twist handle is made out of thermoplastic and stainless steel to withstand corrosion. -
Out of stock
8" wall mount mixing faucet pre-rinse unit with polished chrome body.- 18" riser
- 44" flexible stainless steel hose
- Heat resistant handle
- 1.15 GPM spray valve
- Ceramic cartridges with check valves
- Lever handles
- 1/2" NPT female inlets
- Spray valve holder
- Overhead spring
- 6" adjustable wall bracket.
-
Quarter turn, Eterna compression cartridge, LTC (COLD) with spring check, lever handle, blue index and screw. Fits all newer T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Quarter turn, Eterna compression cartridge, RTC (HOT) with spring check, lever handle, red index and screw. Fits all T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
T&S Pre-Rinse Overhead Spring 888-45, made of chrome-plated steel and measuring 20-5/16" long with a country origin in China, is used by many end users for its sturdy structure.
