Shop All
Shop All
-
This Deck Hinge has a flat base, but can be paired with a concave adapter if needed. When mounted, this deck hinge will have a 90 degree angle from its surface, and will require two #10 fasteners upon installation. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
The 66109-NB Deck Hinge Side Mount Top Fitting has a flat base suitable for any applicable vertical surface (wall) and requires two(2) #10 fasteners upon installing. Although the fasteners are not included, this hinge is designed for 66BSC.25 small black knob with a 1/4”-20 (6.3-20mm) thread. Lastly, this deck hinge is 316SS, being extremely durable for long-term use without corrosion. *fasteners are not included. -
The purpose of the crank handle (SP/PPU125-090S), is for the user to crank filtered oil (clockwise) into your fryer at approximately 25lbs per minute. In addition, this handle has the ability to pump old oil from your fryer(counter-clockwise), into your MirOil filter pot to be disposed. -
Are the clips of your MirOil Filter Pot worn out? If so, Cambia-Distribution recommends the Clip Repair Kit (SKU: SP/209-000SC). This kit can easily replace any broken, or malfunctioning clips on your MirOil Filter Pot.* Thus, saving you the cost of buying a brand new Filter Pot! -
The Round End Cap is designed for 1-3/4” Rub Rail and has a total length of 2-1/4". The outer diameter is also 1-7/8" and requires one(1) #10 fasteners for installation purposes (not included). Lastly, this highly polished Round End Cap is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. *Fasteners not included -
This cap and chain is suitable for deck fills with a slotted key for optimal cap removal. The replacement key is sold separately. (CAMBIA-66060) Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66074 -
This Marine Bow and Stern eye weigh a a total of 342 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 6", the diameter and length of threading is 1/2" and 4" respectively, with 1-7/8" stud hole centres. This product is also completed with two plates : 3" x 3/4’ ( plate 1), 3-1/2" x 1-1/4" ( plate 2). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
This Marine Bow and Stern eye weigh a a total of 157 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 4-1/2″, the diameter and length of threading is 3/8″ and 3″ respectively, with 1-7/16″ stud hole centres. This product is also completed with two plates : 2-1/4" x 3/4" ( plate 1), 2-3/4" x 1-1/4" ( Plate 2 ). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
The MirOil BF1A filter frame is a convenient tool for filtering food waste from deep fryer oil using either the MirOil RB6Ps or RB5Fs filter bags (not included) reducing both labor and paper costs. -
The Angled Water Deck Fill in Blue has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The color and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a stainless steel cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-75YB -
The Angled Water Deck Fill has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0075Y -
The Angled Waste Deck Fill in Black has a slotted key for optional cap removal with a 30 degree angle for easier installation. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The colour and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a cable, ball and spring to be installed to the hose body. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-35YBLK -
The 316SS Angled Waste Deck fills has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage . This deck fill design is also very flush, with a flange diameter of 3" and a polished mirror finish of 316 Stainless Steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0135Y -
Enhance your boating experience with our high-quality Angled Gas Deck Fill designed for durability and convenience.- Corrosion-resistant 316 stainless steel using investment casting.
- Features a secure chain.
- 30-degree angle.
- Suitable for 1-1/2" hoses.
- 3" Flange minimizing the risk of leaks.
-
The Angled Diesel Deck Fill in Green has a slotted key for optional cap removal with a 30 degree angle for easier installation. The design is also very flush, with a flange thickness of 3″ and a finish of 316 Stainless Steel. The colour and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a cable, ball and spring to be installed to the hose body. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-36YG
