Shop All
Shop All
-
Out of stock
This Deck Hinge has a flat base suitable for any applicable surface that requires a 90 degree angle when mounted. Please note, the #10 fasteners (2) are not included. However, this hinge is provided with a 1/4”-20 (6.3-20mm) stainless steel bolt. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This Angled Deck Hinge has a flat base suitable for any applicable surface and requires two(2) #10 fasteners upon installing. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This marine single drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, with a total width of 4-1/6". Finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
The Round End Cap is designed for 1-3/4” Rub Rail and has a total length of 2-1/4". The outer diameter is also 1-7/8" and requires one(1) #10 fasteners for installation purposes (not included). Lastly, this highly polished Round End Cap is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. *Fasteners not included -
This grab handle has 7/8″ round tubing, with an overall length c/c of 6″ — suitable not only for boats, but also any docks or decks that need extra support. Please note, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
The 66109-NB Deck Hinge Side Mount Top Fitting has a flat base suitable for any applicable vertical surface (wall) and requires two(2) #10 fasteners upon installing. Although the fasteners are not included, this hinge is designed for 66BSC.25 small black knob with a 1/4”-20 (6.3-20mm) thread. Lastly, this deck hinge is 316SS, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This Marine Bow and Stern eye weigh a a total of 157 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 4-1/2″, the diameter and length of threading is 3/8″ and 3″ respectively, with 1-7/16″ stud hole centres. This product is also completed with two plates : 2-1/4" x 3/4" ( plate 1), 2-3/4" x 1-1/4" ( Plate 2 ). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
This Marine Bow and Stern eye weigh a a total of 342 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 6", the diameter and length of threading is 1/2" and 4" respectively, with 1-7/8" stud hole centres. This product is also completed with two plates : 3" x 3/4’ ( plate 1), 3-1/2" x 1-1/4" ( plate 2). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
This keyless toggle cap is suitable for deck fills with a 1.5" hose. Chain included. Certified to ASTM CF8M A351, Non EPA Compliant -
FryPowder P36B contains oil stabilizer which is a 100% natural Antioxidant. The purpose of this product is to prevent oil breakdown reactions while cooking, as well as:- Saving oil (up to 40%)
- Less Energy used
- Food Centre cook hotter
- Fryer remain spotless
-
This simple, yet functional pad eye is designed for a #19 screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This simple, yet functional pad eye is designed for a #8 (5mm) screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This round header side mount is designed to be used as an alternate to our standard side mount deck hinge. It also can be used as a mounting bracket to windshield for mirrors at a 90 degree angle. Weighing a total of 86 grams (excluding packaging), it is also designed for the 66BSC.25 or 66WSC.25 1/4”-20 pin and #10 (2) fastener (not included). Lastly, this side mount is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. * Pin and fasteners are not included -
This pelican hook is perfect for any boat requiring the securing a lifeline in a safe and secure way. It is investment cast made with 316 stainless steel for maximum corrosion resistance and durability. This hook is also completed with a stainless steel Quick Release link. -
The Angled Water Deck Fill in Blue has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The color and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a stainless steel cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-75YB
