Shop All
Shop All
-
Out of stock
8" wall mount mixing faucet pre-rinse unit with polished chrome body.- 18" riser
- 44" flexible stainless steel hose
- Heat resistant handle
- 1.15 GPM spray valve
- Ceramic cartridges with check valves
- Lever handles
- 1/2" NPT female inlets
- Spray valve holder
- Overhead spring
- 6" adjustable wall bracket.
-
Out of stock
Pre-Rinse Unit: B-0113-CR-B | Single hole deck mount mixing faucet pre-rinse unit with polished chrome plated brass body- 24" riser
- 44" flexible stainless steel hose
- Heat resistant handle
- 1.15 GPM spray valve
- Ceramic cartridges with check valves
- Lever handles
- 18" flexible stainless steel supply hoses with 1/2" NPSM / 5/8" compression connections
- 6" adjustable wall bracket
- Spray valve holder
- Overhead spring
-
Out of stock
Made of chrome-plated brass, this 18" swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372.
-
Made of chrome-plated brass, this 12″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Quarter turn, Eterna compression cartridge, RTC (HOT) with spring check, lever handle, red index and screw. Fits all T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Quarter turn, Eterna compression cartridge, LTC (COLD) with spring check, lever handle, blue index and screw. Fits all newer T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
This quick release pin is suitable for all of Cambia’s top fittings with a 1/4″ pin size. The pin itself, is 304 stainless steel-formed—being extremely durable for long-term use without corrosion. If you wish to purchase other quick release pins please check the related products section below. -
This quick release pin is suitable for all of Cambia's top fittings with a 1/4" pin size. The pin itself, is 304 stainless steel-formedl—being extremely durable for long-term use without corrosion. Lastly, there is also a 6" nylon-coated lanyard included. If you wish to purchase this quick-release pin without the lanyard (MH-15) please click here. -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Having a very flush design, this 90° gas fuel vent has a 1-1/2" hole size, max hull thickness of 7/16" and a hose size of 9/16″. Including the screen and 2 cups, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
The 316SS Angled Waste Deck fills has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage . This deck fill design is also very flush, with a flange diameter of 3" and a polished mirror finish of 316 Stainless Steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0135Y -
This marine double drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, and finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
This adjustable drink holder is very good quality - made of 304 stainless steel and very easy to clean. It can be easily installed on any applicable surface and folded to save space when not in use. Although this product is sold in the marine division of Cambia-Distribution, this drink holder can also be used for cars, RVs, trolleys, wheelchairs, etc. -
This Deck Hinge has a concave base suitable for 7/8" round tubing or any other concave surface -- for a 90 degree angle when mounted with #10 fasteners. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners & pin are not included. -
This boat hand rail mounts at 90 degrees and comes complete with a 28 set of 1/4" screws for installation purposes. Weighing 0.90 pounds (excluding packaging), this boat hand rail has a 1" O.D. tubing and total height of 1-1/4". Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This jaw slide is designed for 7/8″ O.D. tubing and is completed with a stainless steel set screw for installation purposes. Weighing a total of 100 grams (excluding packaging), there also includes a 1/4”-20 (6.3mm-20) stainless steel pin. Lastly, this jaw slide is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. *Pin and screws included.
