Shop All
Shop All
-
Suitable for all T&S Faucets, this chrome-plated removable RTC Eterna insert is made to last with washer included Certified to NSF 61-Section 9 and NSF 372. -
Suitable for all T&S Faucets, this chrome-plated removable LTC Eterna insert is made to last with washer included. Certified to NSF 61-Section 9 and NSF 372. -
The Water Deck Fill with toggle cap is different from most deck fills sold on Cambia-Distribution as it does not require a key for for cap removal. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. With a hose size of 1-1/2″,the design of this deck fill is flush, with a flange diameter of 3″ and a polished finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and a chain/cable to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125TC -
The 2" Pipe Gas Deck Fill has a slotted key for optional cap removal and a finish of 316 Stainless Steel. The hose has female threaded connection with an inner diameter of 2" and height of 1.5". The design is also very flush, with a flange thickness of 4.0″ and is shipped complete with a cable, ball, and spring to be installed to the hose body.Certified to ASTM CF8M A351, Non EPA Compliant
SKU: 66131 -
SPECS OF 1-1/4" TOP CAP Product Number: CAMBIA-M020-0082Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 216 g (0.48lbs) Material: 316 Stainless Steel *Pin and screws included. -
Out of stock
Enhance the reliability of your equipment with our Side Mount Deck Hinge. Crafted through investment casting, these fittings offer remarkable strength in 316 stainless steel. With a sturdy base measuring 1.9" W x 2.8" L (48x71mm) and a 5/16”-18 (8mm) hole size, these fittings ensure secure fastening. Note: Fasteners not included. SKU: 66213 -
The 1.5" Pipe Gas Deck Fill has a slotted key for optimal cap removal and a polished mirror finish of 316 Stainless Steel. The hose has female threaded connection with an inner diameter of 1.5" and height of 1.5". The design is also very flush, with a flange diameter of 3.5″ and is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap.Certified to ASTM CF8M A351, Non EPA Compliant
SKU: 66031 -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Having a very flush design, this 90° gas fuel vent has a 1-1/2" hole size, max hull thickness of 7/16" and a hose size of 9/16″. Including the screen and 2 cups, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This Folding Step is suitable for any sort of car, boat, RV, trailer, etc. that requires an additional boarding step. This folding step is also non-slip and 316 Stainless Steel investment cast—being extremely durable and stable for long-term use without corrosion. -
This boat hand rail mounts at 90 degrees and comes complete with a 28 set of 1/4" screws for installation purposes. Weighing 0.90 pounds (excluding packaging), this boat hand rail has a 1" O.D. tubing and total height of 1-1/4". Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This stainless steel 3" flat strainer fits inside a 3 1/8" drain valve.
-
This adjustable drink holder is very good quality - made of 304 stainless steel and very easy to clean. It can be easily installed on any applicable surface and folded to save space when not in use. Although this product is sold in the marine division of Cambia-Distribution, this drink holder can also be used for cars, RVs, trolleys, wheelchairs, etc. -
This Diesel Deck Fill has a slotted key for optimal cap removal and a hose size of 2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3-1/2" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66395 -
The Vented Gas Deck fill has a twist cap, which allows for easy opening with finger indents. There is also a slotted key for optimal cap removal. The hose design also allows for OEM installer to pressure test to marine standards prior to install to boat deck. Thus, saving you on labor costs! Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-73VRC -
This 8" Euro Boat Cleat features a European style and includes nuts and washers for installation purposes. Please note, the stud length 2-1/4", with a size of 1/2". Lastly, these cleats are also highly polished investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. nuts and washers included.
