OEM Marine Hardware
OEM Marine Hardware
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
-
This keyless toggle cap is suitable for deck fills with a 1.5" hose. Chain included. Certified to ASTM CF8M A351, Non EPA Compliant -
SPECS OF 3/4″ TOP CAP Product Number: CAMBIA-M020-0044Y Tube Size: 3/4”(19.05mm) Pin Size: 1/4″ (6.3mm)* Weight: 90g (0.20lbs) Material: 316 Stainless Steel *Pin is not included. -
This Water Deck Fill has a slotted key for optimal cap removal and a hose size of 1-1/2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2″ and 3 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125 -
The Water Deck Fill with toggle cap is different from most deck fills sold on Cambia-Distribution as it does not require a key for for cap removal. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. With a hose size of 1-1/2″,the design of this deck fill is flush, with a flange diameter of 3″ and a polished finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and a chain/cable to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125TC -
SPECS OF 7/8" TOP INSERT EYE END Product Number: CAMBIA-66115 Tube Size: 7/8" (22.2mm) Pin Size: 5/16" Inner wall: 0.65" Weight: 60g (0.14lbs) Material: 316 Stainless Steel *Pin is not included. -
This cap and chain is suitable for deck fills with a slotted key for optimal cap removal. The replacement key is sold separately. (CAMBIA-66060) Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66074 -
Out of stock
The 66109-NB Deck Hinge Side Mount Top Fitting has a flat base suitable for any applicable vertical surface (wall) and requires two(2) #10 fasteners upon installing. Although the fasteners are not included, this hinge is designed for 66BSC.25 small black knob with a 1/4”-20 (6.3-20mm) thread. Lastly, this deck hinge is 316SS, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This boat hand rail mounts at 90 degrees and comes complete with a 28 set of 1/4" screws for installation purposes. Weighing 0.90 pounds (excluding packaging), this boat hand rail has a 1" O.D. tubing and total height of 1-1/4". Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Having a very flush design, this 90° gas fuel vent has a 1-1/2" hole size, max hull thickness of 7/16" and a hose size of 9/16″. Including the screen and 2 cups, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This 8" Euro Boat Cleat features a European style and includes nuts and washers for installation purposes. Please note, the stud length 2-1/4", with a size of 1/2". Lastly, these cleats are also highly polished investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. nuts and washers included. -
This Folding Step is suitable for any sort of car, boat, RV, trailer, etc. that requires an additional boarding step. This folding step is also non-slip and 316 Stainless Steel investment cast—being extremely durable and stable for long-term use without corrosion. -
This grab handle has 7/8″ round tubing, with an overall length c/c of 6″ — suitable not only for boats, but also any docks or decks that need extra support. Please note, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This grab handle has 7/8" round tubing, with an overall length of 9.5" -- suitable not only for boats, but also any docks or decks that need extra support. With flanged ends, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
Out of stock
Designed for sailboats or powerboats, the purpose of this lifeline base is used to secure a lifeline or other rigging to the deck. Please note, four #10 oval head screws are needed for installation. Lastly, this highly polished lifeline base is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
Upgrade your vessel's rope management system with our Rope and Deck Pipe. Crafted through investment casting in premium 316 stainless steel, this pipe combines durability and elegance. Designed with a pipe size of 3.8” x 2.5” (97mm x 64mm) and hole requirement of 4.1” x 2.8” (104x71mm), it offers seamless rope passage. Secure installation is ensured with #10 fasteners. *not included* SKU: 66008
