OEM Marine Hardware
OEM Marine Hardware
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
-
Enhance your boating experience with our Premium 4-Step Sliding Boat Ladder. Designed for easy mounting to the underside of your swim platform or boat, this ladder includes slide mount gudgeons and a secure ball and strap mechanism. Crafted from high-quality 304 stainless steel, it features noise-dampening nylon treads and polymer-lined tubing for quiet and comfortable access to the water. Certified to ASTM CF8M A351 SKU: 3208.UN4 -
Sale!
Elevate your boating experience with our 4-Step Boat Ladder with Handle. Designed for easy mounting on top of a swim deck, it includes heavy-duty 4.5" Gudgeons. Crafted from high-quality 304 stainless steel, this ladder features noise-dampening nylon treads and polymer-lined tubing for quiet, comfortable, and secure access to the water. Certified to ASTM CF8M A351 SKU: 3205.OV4FG -
This cap and chain is suitable for deck fills with a slotted key for optimal cap removal. The replacement key is sold separately. (CAMBIA-66060) Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66074 -
The Vented Gas Deck fill has a twist cap, which allows for easy opening with finger indents. There is also a slotted key for optimal cap removal. The hose design also allows for OEM installer to pressure test to marine standards prior to install to boat deck. Thus, saving you on labor costs! Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-73VRC -
This Folding Step is suitable for any sort of car, boat, RV, trailer, etc. that requires an additional boarding step. This folding step is also non-slip and 316 Stainless Steel investment cast—being extremely durable and stable for long-term use without corrosion. -
This grab handle has 7/8" round tubing, with an overall length of 9.5" -- suitable not only for boats, but also any docks or decks that need extra support. With flanged ends, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This replacement deck fill key is suitable for deck fills with a slotted key surface of 1-3/16" hole-to-hole distance. This key is also a polished mirror finish of 316 Stainless steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66060 -
This 60 degree rectangular base rail fitting is designed for 1″ O.D. tubing and is completed with 1/4-28 stainless steel set screw for installation purposes. Weighing a total of 220g grams (excluding packaging), it is also has a base dimension of 3.2" x 1.8" (89mm x 48mm). Lastly, this base rail fitting is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. -
This Deck Hinge has a flat base suitable for any applicable surface that requires a 90 degree angle when mounted. Please note, the #10 fasteners (2) are not included. However, this hinge is provided with a 1/4”-20 (6.3-20mm) stainless steel bolt. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This Angled Deck Hinge has a flat base suitable for any applicable surface and requires two(2) #10 fasteners upon installing. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This marine single drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, with a total width of 4-1/6". Finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
The Round End Cap is designed for 1-3/4” Rub Rail and has a total length of 2-1/4". The outer diameter is also 1-7/8" and requires one(1) #10 fasteners for installation purposes (not included). Lastly, this highly polished Round End Cap is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. *Fasteners not included -
This grab handle has 7/8″ round tubing, with an overall length c/c of 6″ — suitable not only for boats, but also any docks or decks that need extra support. Please note, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
Out of stock
The 66109-NB Deck Hinge Side Mount Top Fitting has a flat base suitable for any applicable vertical surface (wall) and requires two(2) #10 fasteners upon installing. Although the fasteners are not included, this hinge is designed for 66BSC.25 small black knob with a 1/4”-20 (6.3-20mm) thread. Lastly, this deck hinge is 316SS, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This Marine Bow and Stern eye weigh a a total of 157 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 4-1/2″, the diameter and length of threading is 3/8″ and 3″ respectively, with 1-7/16″ stud hole centres. This product is also completed with two plates : 2-1/4" x 3/4" ( plate 1), 2-3/4" x 1-1/4" ( Plate 2 ). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts.
