OEM Marine Hardware
OEM Marine Hardware
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
-
SPECS OF MODIFIED 7/8″ JAW SLIDE WITH BOLT Product Number: CAMBIA-66100-M Tube Size: 7/8”(22.2mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 100 g (0.22lbs) Material: 316 Stainless Steel *Pin and screws included. -
Sale!
Discover the ultimate water access solution with our 3-Step Under Platform Ladder. Crafted from premium 304 stainless steel with a mirror finish, this ladder is designed to mount seamlessly under your swim platform or boat. Its noise-dampening nylon treads and polymer-lined tubing ensure a quiet, comfortable ascent. Certified to ASTM CF8M A351 standards, it comes complete with slide mount gudgeons and a ball and strap for secure positioning. -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Weighing a total of 0.22lbs, this straight gas fuel vent has a 3/4" hole size with a 9/16" hose. Including the screens, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
SPECS OF 1" JAW SLIDE WITH BOLT Product Number: CAMBIA-66102 Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 110 g (0.24lbs) Material: 316 Stainless Steel *Pin and screws included. -
This quick release pin is suitable for all of Cambia’s top fittings with a 1/4″ pin size. The pin itself, is 304 stainless steel-formed—being extremely durable for long-term use without corrosion. If you wish to purchase other quick release pins please check the related products section below. -
This quick release pin is suitable for all of Cambia's top fittings with a 1/4" pin size. The pin itself, is 304 stainless steel-formedl—being extremely durable for long-term use without corrosion. Lastly, there is also a 6" nylon-coated lanyard included. If you wish to purchase this quick-release pin without the lanyard (MH-15) please click here. -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Having a very flush design, this 90° gas fuel vent has a 1-1/2" hole size, max hull thickness of 7/16" and a hose size of 9/16″. Including the screen and 2 cups, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
The 316SS Angled Waste Deck fills has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage . This deck fill design is also very flush, with a flange diameter of 3" and a polished mirror finish of 316 Stainless Steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0135Y -
SPECS OF 3/4″ TOP CAP Product Number: CAMBIA-M020-0044Y Tube Size: 3/4”(19.05mm) Pin Size: 1/4″ (6.3mm)* Weight: 90g (0.20lbs) Material: 316 Stainless Steel *Pin is not included. -
This marine double drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, and finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
This adjustable drink holder is very good quality - made of 304 stainless steel and very easy to clean. It can be easily installed on any applicable surface and folded to save space when not in use. Although this product is sold in the marine division of Cambia-Distribution, this drink holder can also be used for cars, RVs, trolleys, wheelchairs, etc. -
This Deck Hinge has a concave base suitable for 7/8" round tubing or any other concave surface -- for a 90 degree angle when mounted with #10 fasteners. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners & pin are not included. -
This boat hand rail mounts at 90 degrees and comes complete with a 28 set of 1/4" screws for installation purposes. Weighing 0.90 pounds (excluding packaging), this boat hand rail has a 1" O.D. tubing and total height of 1-1/4". Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This jaw slide is designed for 7/8″ O.D. tubing and is completed with a stainless steel set screw for installation purposes. Weighing a total of 100 grams (excluding packaging), there also includes a 1/4”-20 (6.3mm-20) stainless steel pin. Lastly, this jaw slide is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. *Pin and screws included. -
Out of stock
Designed for sailboats or powerboats, the purpose of this lifeline base is used to secure a lifeline or other rigging to the deck. Please note, four #10 oval head screws are needed for installation. Lastly, this highly polished lifeline base is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion.
