OEM Marine Hardware
OEM Marine Hardware
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
-
The Water Deck Fill with toggle cap is different from most deck fills sold on Cambia-Distribution as it does not require a key for for cap removal. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. With a hose size of 1-1/2″,the design of this deck fill is flush, with a flange diameter of 3″ and a polished finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and a chain/cable to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125TC -
This Water Deck Fill has a slotted key for optimal cap removal and a hose size of 1-1/2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2″ and 3 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125 -
The Vented Gas Deck fill has a twist cap, which allows for easy opening with finger indents. There is also a slotted key for optimal cap removal. The hose design also allows for OEM installer to pressure test to marine standards prior to install to boat deck. Thus, saving you on labor costs! Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-73VRC -
This keyless toggle cap is suitable for deck fills with a 1.5" hose. Chain included. Certified to ASTM CF8M A351, Non EPA Compliant -
This Take Apart Deck Hinge, has a 3-3/4" length and 2" width when mounted with four (4) #10 fasteners (not included). Lastly, this hinge is investment cast, 316 stainless steel mirror finish—being extremely durable for long-term use without corrosion. *fasteners are not included. -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Weighing a total of 0.22lbs, this straight gas fuel vent has a 3/4" hole size with a 9/16" hose. Including the screens, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
Elevate your boat's safety and aesthetics with our Stanchion Cap. Meticulously crafted using investment casting from premium 316 stainless steel, this cap offers durability and a sleek appearance. Designed to fit a 1” (25.4mm) outer diameter tube with a 1/4” (6.3mm) hole diameter, it includes 1/4-28 set screws for easy installation. Enhance your vessel's look and security with its mirror finish. SKU: 66188 -
This bow form mounts at 110 degrees and comes complete with a 28 set of 1/4″ screws for installation purposes. Weighing 0.77 pounds (excluding packaging), this boat hand rail has a 1″ O.D. tubing. Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This marine single drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, with a total width of 4-1/6". Finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
Enhance the reliability of your equipment with our Side Mount Deck Hinge. Crafted through investment casting, these fittings offer remarkable strength in 316 stainless steel. With a sturdy base measuring 1.9" W x 2.8" L (48x71mm) and a 5/16”-18 (8mm) hole size, these fittings ensure secure fastening. Note: Fasteners not included. SKU: 66213 -
The 316SS Round Header Side Mount is designed to be used as an alternate to our standard side mount deck hinge. It also can be used as a mounting bracket to fit windshield for mirrors up to 0.60" in width. Weighing a total of 86 grams (excluding packaging), it is also designed for the 66BSC.25 or 66WSC.25 1/4”-20 pin and #10 (2) fastener (not included). Lastly, this side mount is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. Pin and fasteners are not included -
Upgrade your vessel's rope management system with our Rope and Deck Pipe. Crafted through investment casting in premium 316 stainless steel, this pipe combines durability and elegance. Designed with a pipe size of 3.8” x 2.5” (97mm x 64mm) and hole requirement of 4.1” x 2.8” (104x71mm), it offers seamless rope passage. Secure installation is ensured with #10 fasteners. *not included* SKU: 66008 -
This replacement deck fill key is suitable for deck fills with a slotted key surface of 1-3/16" hole-to-hole distance. This key is also a polished mirror finish of 316 Stainless steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66060 -
This quick release pin is suitable for all of Cambia’s top fittings with a 1/4″ pin size. The pin itself, is 304 stainless steel-formed—being extremely durable for long-term use without corrosion. If you wish to purchase other quick release pins please check the related products section below. -
This quick release pin is suitable for all of Cambia's top fittings with a 1/4" pin size. The pin itself, is 304 stainless steel-formedl—being extremely durable for long-term use without corrosion. Lastly, there is also a 6" nylon-coated lanyard included. If you wish to purchase this quick-release pin without the lanyard (MH-15) please click here.
