OEM Marine Hardware
OEM Marine Hardware
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
-
This screw is designed to be paired with CAMBIA-66109-NB — a zamak side mount deck hinge top fitting, with a 1/4"-20 threaded pin size. Lastly, this screw has a 304 stainless steel mirror finish and a nylon oval top, being extremely durable for long-term use without corrosion. -
This simple, yet functional pad eye is designed for a #8 (5mm) screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This simple, yet functional pad eye is designed for a #19 screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This replacement deck fill key is suitable for deck fills with a slotted key surface of 1-3/16" hole-to-hole distance. This key is also a polished mirror finish of 316 Stainless steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66060 -
This quick release pin is suitable for all of Cambia’s top fittings with a 1/4″ pin size. The pin itself, is 304 stainless steel-formed—being extremely durable for long-term use without corrosion. If you wish to purchase other quick release pins please check the related products section below. -
These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accommodate transom thickness. This eye nut is suitable for a 3/8″ thread and has an overall height of 1-7/8″. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
The Round End Cap is designed for 1-3/4” Rub Rail and has a total length of 2-1/4". The outer diameter is also 1-7/8" and requires one(1) #10 fasteners for installation purposes (not included). Lastly, this highly polished Round End Cap is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. *Fasteners not included -
These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accommodate transom thickness. This eye nut is suitable for a 1/2" thread and has an overall height of 1-7/8". Lastly, these eye nuts are formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion.
-
This Deck Hinge has a flat base, but can be paired with a concave adapter if needed. When mounted, this deck hinge will have a 90 degree angle from its surface, and will require two #10 fasteners upon installation. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This quick release pin is suitable for all of Cambia's top fittings with a 1/4" pin size. The pin itself, is 304 stainless steel-formedl—being extremely durable for long-term use without corrosion. Lastly, there is also a 6" nylon-coated lanyard included. If you wish to purchase this quick-release pin without the lanyard (MH-15) please click here. -
This marine single drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, with a total width of 4-1/6". Finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
Elevate your boat's safety and aesthetics with our Stanchion Cap. Meticulously crafted using investment casting from premium 316 stainless steel, this cap offers durability and a sleek appearance. Designed to fit a 1” (25.4mm) outer diameter tube with a 1/4” (6.3mm) hole diameter, it includes 1/4-28 set screws for easy installation. Enhance your vessel's look and security with its mirror finish. SKU: 66188 -
SPECS OF 3/4″ TOP CAP Product Number: CAMBIA-M020-0044Y Tube Size: 3/4”(19.05mm) Pin Size: 1/4″ (6.3mm)* Weight: 90g (0.20lbs) Material: 316 Stainless Steel *Pin is not included. -
This Deck Hinge has a concave base suitable for 7/8" round tubing or any other concave surface -- for a 90 degree angle when mounted with #10 fasteners. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners & pin are not included. -
This Angled Deck Hinge has a flat base suitable for any applicable surface and requires two(2) #10 fasteners upon installing. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included.
