OEM Marine Hardware
OEM Marine Hardware
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
Cambia Distribution specializes in OEM supply of quality hardware for the marine industry including but not limited to: cleats, bow & stern eyes, top hardware, hardware & accessories, deck fills, vents, boat ladders, anchors, deck hinges, base rail fittings, deck cleats, drink holders, end fittings, and sailboat hardware.
-
SPECS OF 1" TOP INSERT EYE END Product Number: 66120 Tube Size: 1" (25.4mm) Pin Size: 5/16"* Inner wall: 0.065" Weight: 84g (0.19lbs) Material: 316 Stainless Steel *Pin is not included. -
The Round End Cap is designed for 1-3/4” Rub Rail and has a total length of 2-1/4". The outer diameter is also 1-7/8" and requires one(1) #10 fasteners for installation purposes (not included). Lastly, this highly polished Round End Cap is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. *Fasteners not included -
The 1.5" Pipe Gas Deck Fill has a slotted key for optimal cap removal and a polished mirror finish of 316 Stainless Steel. The hose has female threaded connection with an inner diameter of 1.5" and height of 1.5". The design is also very flush, with a flange diameter of 3.5″ and is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap.Certified to ASTM CF8M A351, Non EPA Compliant
SKU: 66031 -
This screw is designed to be paired with CAMBIA-66109-NB — a zamak side mount deck hinge top fitting, with a 1/4"-20 threaded pin size. Lastly, this screw has a 304 stainless steel mirror finish and a nylon oval top, being extremely durable for long-term use without corrosion. -
Sale!
Upgrade your boating experience with our Premium 2-Step Over Platform Ladder. Crafted from high-quality 304 stainless steel and equipped with heavy-duty 6" Gudgeons, this ladder is designed for easy mounting on top of your swim deck. It features noise-dampening nylon treads and polymer-lined tubing for a peaceful entry into the water. Certified to ASTM CF8M A351 standards, this ladder offers safety and durability you can trust. SKU: 3205.OV2
-
This adjustable drink holder is very good quality - made of 304 stainless steel and very easy to clean. It can be easily installed on any applicable surface and folded to save space when not in use. Although this product is sold in the marine division of Cambia-Distribution, this drink holder can also be used for cars, RVs, trolleys, wheelchairs, etc. -
This Marine Bow and Stern eye weigh a a total of 157 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 4-1/2″, the diameter and length of threading is 3/8″ and 3″ respectively, with 1-7/16″ stud hole centres. This product is also completed with two plates : 2-1/4" x 3/4" ( plate 1), 2-3/4" x 1-1/4" ( Plate 2 ). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
This Marine Bow and Stern eye weigh a a total of 342 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 6", the diameter and length of threading is 1/2" and 4" respectively, with 1-7/8" stud hole centres. This product is also completed with two plates : 3" x 3/4’ ( plate 1), 3-1/2" x 1-1/4" ( plate 2). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accommodate transom thickness. This eye nut is suitable for a 1/2" thread and has an overall height of 1-7/8". Lastly, these eye nuts are formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accommodate transom thickness. This eye nut is suitable for a 3/8″ thread and has an overall height of 1-7/8″. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion.
-
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Weighing a total of 0.22lbs, this straight gas fuel vent has a 3/4" hole size with a 9/16" hose. Including the screens, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This pelican hook is perfect for any boat requiring the securing a lifeline in a safe and secure way. It is investment cast made with 316 stainless steel for maximum corrosion resistance and durability. This hook is also completed with a stainless steel Quick Release link. -
This marine double drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, and finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
This marine single drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, with a total width of 4-1/6". Finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
This simple, yet functional pad eye is designed for a #8 (5mm) screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This Deck Hinge has a concave base suitable for 7/8" round tubing or any other concave surface -- for a 90 degree angle when mounted with #10 fasteners. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners & pin are not included. -
Enhance your boat's windshield stability with our Adjustable Windshield Brace. Expertly crafted through investment casting in premium 316 stainless steel, this brace offers durability and a sleek design. With a length that adjusts from 9.5" to 11" and a choice of widths : Foot base width is 3/4" for mounting to deck platform; top foot is 15/16" width for mounting to windshield frame, it's a versatile solution for secure windshield support. Please note that #8 fasteners (2) are not included. Elevate your vessel's appearance and functionality with its mirror finish. SKU:665106 -
This Heavy Duty Deck Hinge has a flat base and a 90 degree angle when mounted with 1/4" (2) fasteners. Although the fasteners and pin are not included, this hinge is designed for our #88BSC.1 large black knob with a 5/16”-18 (8mm) thread. Lastly, it has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
Enhance the reliability of your equipment with our Side Mount Deck Hinge. Crafted through investment casting, these fittings offer remarkable strength in 316 stainless steel. With a sturdy base measuring 1.9" W x 2.8" L (48x71mm) and a 5/16”-18 (8mm) hole size, these fittings ensure secure fastening. Note: Fasteners not included. SKU: 66213 -
The 2" Pipe Gas Deck Fill has a slotted key for optional cap removal and a finish of 316 Stainless Steel. The hose has female threaded connection with an inner diameter of 2" and height of 1.5". The design is also very flush, with a flange thickness of 4.0″ and is shipped complete with a cable, ball, and spring to be installed to the hose body.Certified to ASTM CF8M A351, Non EPA Compliant
SKU: 66131 -
This 60 degree rectangular base rail fitting is designed for 1″ O.D. tubing and is completed with 1/4-28 stainless steel set screw for installation purposes. Weighing a total of 220g grams (excluding packaging), it is also has a base dimension of 3.2" x 1.8" (89mm x 48mm). Lastly, this base rail fitting is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. -
This Deck Hinge has a flat base suitable for any applicable surface that requires a 90 degree angle when mounted. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This Deck Hinge has a flat base suitable for any applicable surface that requires a 90 degree angle when mounted. Please note, the #10 fasteners (2) are not included. However, this hinge is provided with a 1/4”-20 (6.3-20mm) stainless steel bolt. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This round header side mount is designed to be used as an alternate to our standard side mount deck hinge. It also can be used as a mounting bracket to windshield for mirrors at a 90 degree angle. Weighing a total of 86 grams (excluding packaging), it is also designed for the 66BSC.25 or 66WSC.25 1/4”-20 pin and #10 (2) fastener (not included). Lastly, this side mount is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. * Pin and fasteners are not included -
The Vented Gas Deck fill has a twist cap, which allows for easy opening with finger indents. There is also a slotted key for optimal cap removal. The hose design also allows for OEM installer to pressure test to marine standards prior to install to boat deck. Thus, saving you on labor costs! Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-73VRC -
This Angled Deck Hinge has a flat base suitable for any applicable surface and requires two(2) #10 fasteners upon installing. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
The Angled Diesel Deck Fill in Green has a slotted key for optional cap removal with a 30 degree angle for easier installation. The design is also very flush, with a flange thickness of 3″ and a finish of 316 Stainless Steel. The colour and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a cable, ball and spring to be installed to the hose body. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-36YG -
The Angled Waste Deck Fill in Black has a slotted key for optional cap removal with a 30 degree angle for easier installation. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The colour and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a cable, ball and spring to be installed to the hose body. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-35YBLK -
The 316SS Angled Waste Deck fills has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage . This deck fill design is also very flush, with a flange diameter of 3" and a polished mirror finish of 316 Stainless Steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0135Y -
The Angled Water Deck Fill in Blue has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The color and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a stainless steel cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-75YB -
The Angled Water Deck Fill has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0075Y -
This Deck Hinge has a flat base, but can be paired with a concave adapter if needed. When mounted, this deck hinge will have a 90 degree angle from its surface, and will require two #10 fasteners upon installation. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This Diesel Deck Fill has a slotted key for optimal cap removal and a hose size of 2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3-1/2" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66395 -
SPECS OF 1-1/4" JAW SLIDE Product Number: CAMBIA-M020-0081Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 168 g (0.37lbs) Material: 316 Stainless Steel *Pin and screws included. -
Out of stock
SPECS OF DOUBLE SET SCREW JAW SLIDE Product Number: CAMBIA-M021-0032Y Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 130 g (0.29lbs) Material: 316 Stainless Steel *Pin and screws included. -
Out of stock
SPECS OF DOUBLE SET SCREW JAW SLIDE Product Number: CAMBIA-M021-0030Y Tube Size: 7/8”(22.2mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 100 g (0.22lbs) Material: 316 Stainless Steel *Pin and screws included.
-
SPECS OF DOUBLE SET SCREW 1" TOP CAP Product Number: CAMBIA-M021-0033Y Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 116 g (0.26lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF 1-1/4" TOP CAP Product Number: CAMBIA-M020-0082Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 216 g (0.48lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF DOUBLE SET SCREW 7/8" TOP CAP Product Number: CAMBIA-M021-0031Y Tube Size: 7/8”(22.2mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 96 g (0.21lbs) Material: 316 Stainless Steel *Pin and screws included.
-
This jaw slide is designed for 7/8″ O.D. tubing and is completed with a stainless steel set screw for installation purposes. Weighing a total of 100 grams (excluding packaging), there also includes a 1/4”-20 (6.3mm-20) stainless steel pin. Lastly, this jaw slide is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. *Pin and screws included. -
SPECS OF 1" JAW SLIDE WITH BOLT Product Number: CAMBIA-66102 Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 110 g (0.24lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF 1" OPEN JAW SLIDE Product Number: CAMBIA-66189 Tube Size: 1”(25.4mm) Bolt Size: 1/4”-20(6.3mm-20)* Weight: 95 g (0.21lbs) Material: 316 Stainless Steel *Bolt not included -
SPECS OF 1″ OPEN JAW SLIDE Product Number: CAMBIA-66089 Tube Size: 7/8”(22.2mm) Bolt Size: 1/4”-20(6.3mm-20)* Weight: 90 g (0.20lbs) Material: 316 Stainless Steel *Bolt not included -
SPECS OF 7/8″ TOP CAP Product Number: CAMBIA-66101-M Tube Size: 7/8″ (22.2mm) Pin Size: 1/4″ (6.3mm)* Weight: 100g (0.22lbs) Material: 316 Stainless Steel Manufacturing Process: Investment Cast *Pin is not included -
This Take Apart Deck Hinge, has a 3-3/4" length and 2" width when mounted with four (4) #10 fasteners (not included). Lastly, this hinge is investment cast, 316 stainless steel mirror finish—being extremely durable for long-term use without corrosion. *fasteners are not included. -
This keyless toggle cap is suitable for deck fills with a 1.5" hose. Chain included. Certified to ASTM CF8M A351, Non EPA Compliant -
SPECS OF 3/4″ TOP CAP Product Number: CAMBIA-M020-0044Y Tube Size: 3/4”(19.05mm) Pin Size: 1/4″ (6.3mm)* Weight: 90g (0.20lbs) Material: 316 Stainless Steel *Pin is not included. -
This Water Deck Fill has a slotted key for optimal cap removal and a hose size of 1-1/2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2″ and 3 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125 -
The Water Deck Fill with toggle cap is different from most deck fills sold on Cambia-Distribution as it does not require a key for for cap removal. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. With a hose size of 1-1/2″,the design of this deck fill is flush, with a flange diameter of 3″ and a polished finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and a chain/cable to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125TC -
SPECS OF 7/8" TOP INSERT EYE END Product Number: CAMBIA-66115 Tube Size: 7/8" (22.2mm) Pin Size: 5/16" Inner wall: 0.65" Weight: 60g (0.14lbs) Material: 316 Stainless Steel *Pin is not included.
