Shop All
Shop All
-
The Water Deck Fill with toggle cap is different from most deck fills sold on Cambia-Distribution as it does not require a key for for cap removal. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. With a hose size of 1-1/2″,the design of this deck fill is flush, with a flange diameter of 3″ and a polished finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and a chain/cable to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125TC -
This Water Deck Fill has a slotted key for optimal cap removal and a hose size of 1-1/2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2″ and 3 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel.  Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125 -
The Vented Gas Deck fill has a twist cap, which allows for easy opening with finger indents. There is also a slotted key for optimal cap removal. The hose design also allows for OEM installer to pressure test to marine standards prior to install to boat deck. Thus, saving you on labor costs! Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-73VRC -
T&S Pre-Rinse Overhead Spring 888-45, made of chrome-plated steel and measuring 20-5/16" long with a country origin in China, is used by many end users for its sturdy structure.
-
Quarter turn, Eterna compression cartridge, RTC (HOT) with spring check, lever handle, red index and screw. Fits all T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Quarter turn, Eterna compression cartridge, LTC (COLD) with spring check, lever handle, blue index and screw. Fits all newer T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
8" wall mount mixing faucet pre-rinse unit with polished chrome body.- 18" riser
- 44" flexible stainless steel hose
- Heat resistant handle
- 1.15 GPM spray valve
- Ceramic cartridges with check valves
- Lever handles
- 1/2" NPT female inlets
- Spray valve holder
- Overhead spring
- 6" adjustable wall bracket.
-
This waste drain twist handle is made out of thermoplastic and stainless steel to withstand corrosion. -
Out of stock
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet with 18" 65X nozzle (with stream regulator outlet), compression cartridge with spring check, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
This chrome-plated metal lever handle is in the red index (hot) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This chrome-plated metal lever handle is in the blue index (cold) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
The T&S 7861-45 gray rubber bumper is an ideal replacement for the one that came with B-0107 spray valves. If you notice tears forming in the spray valve bumper, it's a good idea to replace it. Otherwise your plates and glassware could be damaged during cleaning. -
Out of stock
This deck mount double pantry faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few key features include:
- Chrome-plate brass body
- 18"swing nozzle with stream regulator outlet (65x)
- Compression cartridge with spring check
- Lever handle
- 18" flexible stainless steel supply hoses
- 1/2″ NPSM male inlet
-
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, 18" flexible stainless steel supply hoses, Â and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements.
