Shop All
Shop All
-
The MirOil D900B replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil! -
- For safe storage and transport of up to 6 gallons (21L) of oil.
- Silicone-gasketed lid with quick locking clips
-
MirOil L104 Bulk FryPowder, with up to 80 size "B" packs and 100 size "C" packs, enhances taste, appearance, and cooking speed. Save up to 40% of oil, boost fryer efficiency, and maintain spotless equipment. Acting as a natural antioxidant and filter aid, it prevents gradual food quality degradation, working continuously throughout frying for premium oil performance. Recommended every 5-8 hours or before each session, FryPowder is your key to elevated frying experiences Photo shows Optional L103 (special order) -
The 316SS Round Header Side Mount is designed to be used as an alternate to our standard side mount deck hinge. It also can be used as a mounting bracket to fit windshield for mirrors up to 0.60" in width. Weighing a total of 86 grams (excluding packaging), it is also designed for the 66BSC.25 or 66WSC.25 1/4”-20 pin and #10 (2) fastener (not included). Lastly, this side mount is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. Pin and fasteners are not included -
Acting as a natural antioxidant and filter aid, MirOil L106 Bulk FryPowder prevents gradual food quality degradation, working continuously throughout frying for premium oil performance. Recommended every 5-8 hours or before each session, FryPowder is your key to elevated frying experiences. -
Wondering if your frying oil needs changing? This MirOil PCM test kit measures the oil's total polar contaminated material for easy adjustment of oil quality levels. More specifically, it quantifies the breakdown of oil and non-oil substances, as to the aging of your deep frying oil. Thus, allowing you to monitor and make the right decisions at the right time.This product is evidently a lifesaver in optimizing the use of your frying oil in restaurant kitchens and other food service environments. -
Fry Quality Assurance Test Kit for Alkaline Contaminant Material in frying oils. 12 unit test determines proper dose of FryPowder or FryLiquid in oil. -
MirOil 75HD30 is a hand-operated filter pump, suitable for gas fryers with drain down valves. It has a frying oil capacity of up to 75 lbs (38 liters) and is equipped with a sturdy stainless steel basin with splash-proof device for safe transportation of hot oil. Other information for this premium quality filter pump includes, moving 30lbs oil per minute with a slow pumping speed, the ability to move over uneven surfaces with 8-inch wheels, a coated oil drum that sits in a high mobility trolley, and a detachable lid with quick locking clips.
-
The MirOil CF2A filter frame is a convenient tool for filtering food waste from deep fryer oil using either the MirOil RC88PS or CF77FS filter bags (not included) reducing both labor and paper costs. -
Out of stock
The MirOil RD44Ps replacement filter bag is a component of the EZ FLOW Series (D44Ps) filter system. This filter bag features the ability to safely and quickly filter oil at frying temperatures, is suitable for heavy crumb loads, and does not leach harmful chemicals into your oil! -
MirOil 55HD30 is a hand-operated filter pump, suitable for gas fryers with drain down valves. It has a frying oil capacity of up to 55 lbs (28 liters) and is equipped with a sturdy stainless steel basin with splash-proof device for safe transportation of hot oil. Other information for this premium quality filter pump includes, moving 30lbs oil per minute with a slow pumping speed, the ability to move over uneven surfaces with 8-inch wheels, a coated oil drum that sits in a high mobility trolley, and a detachable lid with quick locking clips.
-
The purpose of the crank handle (SP/PPU125-090S), is for the user to crank filtered oil (clockwise) into your fryer at approximately 25lbs per minute. In addition, this handle has the ability to pump old oil from your fryer(counter-clockwise), into your MirOil filter pot to be disposed. -
SPECS OF 3/4″ TOP CAP Product Number: CAMBIA-M020-0044Y Tube Size: 3/4”(19.05mm) Pin Size: 1/4″ (6.3mm)* Weight: 90g (0.20lbs) Material: 316 Stainless Steel *Pin is not included. -
This grab handle has 7/8″ round tubing, with an overall length c/c of 6″ — suitable not only for boats, but also any docks or decks that need extra support. Please note, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
The MirOil BD505 filter pump is a high volume electric pump, being suitable for 1-way pumping fryers with drain valves. It has a frying oil capacity of up to 55 lbs (28 litres) and is equipped with a high mobility trolley for safe transportation of hot oil. Other information for this heavy duty filter pump includes, a rugged coated steel oil pan that fits under fryer valves with low clearance, and the ability to move over uneven surfaces with 8-inch wheels and heavy duty casters.
-
This screw is designed to be paired with CAMBIA-66109-NB — a zamak side mount deck hinge top fitting, with a 1/4"-20 threaded pin size. Lastly, this screw has a 304 stainless steel mirror finish and a nylon oval top, being extremely durable for long-term use without corrosion. -
SPECS OF 7/8" TOP INSERT EYE END Product Number: CAMBIA-66115 Tube Size: 7/8" (22.2mm) Pin Size: 5/16" Inner wall: 0.65" Weight: 60g (0.14lbs) Material: 316 Stainless Steel *Pin is not included. -
Enhance your boat's windshield stability with our Adjustable Windshield Brace. Expertly crafted through investment casting in premium 316 stainless steel, this brace offers durability and a sleek design. With a length that adjusts from 9.5" to 11" and a choice of widths : Foot base width is 3/4" for mounting to deck platform; top foot is 15/16" width for mounting to windshield frame, it's a versatile solution for secure windshield support. Please note that #8 fasteners (2) are not included. Elevate your vessel's appearance and functionality with its mirror finish. SKU:665106 -
Elevate your boat's safety and aesthetics with our Stanchion Cap. Meticulously crafted using investment casting from premium 316 stainless steel, this cap offers durability and a sleek appearance. Designed to fit a 1” (25.4mm) outer diameter tube with a 1/4” (6.3mm) hole diameter, it includes 1/4-28 set screws for easy installation. Enhance your vessel's look and security with its mirror finish. SKU: 66188 -
Enhance your boating experience with our high-quality Angled Gas Deck Fill designed for durability and convenience.- Corrosion-resistant 316 stainless steel using investment casting.
- Features a secure chain.
- 30-degree angle.
- Suitable for 1-1/2" hoses.
- 3" Flange minimizing the risk of leaks.
-
Enhance the functionality and aesthetics of your boat with our 316SS Hawse Pipe.- Crafted using investment casting.
- Features a durable 316 stainless steel construction and a sleek mirror finish.
- Flange size of 5.5" x 2.5" (140x64mm) and Interior hole of 1.5" x 3.75" (38x95mm), offers easy mooring and rope management.
- 0.88" (22mm) deep and includes #10(4) fasteners for secure installation.
-
Upgrade your vessel's rope management system with our Rope and Deck Pipe. Crafted through investment casting in premium 316 stainless steel, this pipe combines durability and elegance. Designed with a pipe size of 3.8” x 2.5” (97mm x 64mm) and hole requirement of 4.1” x 2.8” (104x71mm), it offers seamless rope passage. Secure installation is ensured with #10 fasteners. *not included* SKU: 66008 -
Suitable for all T&S Faucets, this chrome-plated removable LTC Eterna insert is made to last with washer included. Certified to NSF 61-Section 9 and NSF 372. -
Suitable for all T&S Faucets, this chrome-plated removable RTC Eterna insert is made to last with washer included Certified to NSF 61-Section 9 and NSF 372. -
Wall mount pot filler with chrome plated brass body, 18" double joint swing nozzle, on-off volume control outlet with insulated grip, 1/2" NPT female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
This rubber doe spray face has a 1.15 GPM spray valve flow and designed for the B-107 spray valve. Made in the USA. -
44" flexible stainless steel hose, chrome-plated brass 3/4-14 UN female outlet and inlet, and gray thermoplastic handle. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
44" flexible stainless steel hose, 7/8-20 UN female outlet and 3/4-14 UN female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Chrome-plated brass 2" NPT female x 1 1/2" NPT male adapter for rotary waste valve.
-
Universal repair kit for 3" or 3 1/2" T&S waste valves with twist or lever handle. Included in Kit- Elastomer gaskets & washers
- O-rings
- Plastic bushing
- Stainless steel C-ring
-
This 6” wall bracket has a polished brass body, and screws are included for mounting purposes. Fits 3/8" pipe and has a 2 1/4" wall flange, made in China. -
Standard-type T&S B-107 spray valves can be repaired with these parts to ensure GPM output accuracy.
Included in Kit:
- Valve stem
- Spring
- Washers
- Packing seal
Certified to NSF 61-Section 9 and NSF 372. 2019 DOE PRSV - Class II compliant.
-
In industrial kitchens, the B-107 spray valve is designed for heavy-duty use— with a 1.15 GPM spray valve flow and a doe spray face. There is also a 3/4-14 UN male inlet, a hold down ring and shuts off when handle is released. Made to last, this product has a polished chrome-plated brass body and a rubber bumper.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. EPAct 2005 compliant. -
The T&S 7861-45 gray rubber bumper is an ideal replacement for the one that came with B-0107 spray valves. If you notice tears forming in the spray valve bumper, it's a good idea to replace it. Otherwise your plates and glassware could be damaged during cleaning. -
Polished chrome-plated 18" riser with 3/8" NPT male threads for T&S pre-rinse units. Certified to NSF 61-Section 9 and NSF 372. -
This chrome-plated metal lever handle is in the red index (hot) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This chrome-plated metal lever handle is in the blue index (cold) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This waste drain twist handle is made out of thermoplastic and stainless steel to withstand corrosion. -
This stainless steel 3" flat strainer fits inside a 3 1/8" drain valve.
-
T&S Pre-Rinse Overhead Spring 888-45, made of chrome-plated steel and measuring 20-5/16" long with a country origin in China, is used by many end users for its sturdy structure.
-
Out of stock
This deck mount double pantry faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few key features include:
- Chrome-plate brass body
- 18"swing nozzle with stream regulator outlet (65x)
- Compression cartridge with spring check
- Lever handle
- 18" flexible stainless steel supply hoses
- 1/2″ NPSM male inlet
-
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, 18" flexible stainless steel supply hoses, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, 12″ swing nozzle (with stream regulator outlet), compression cartridge with spring check, 18" flexible stainless steel supply hoses, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet with 18" 65X nozzle (with stream regulator outlet), compression cartridge with spring check, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this concealed mixing faucet. Chrome-plate brass body, compression cartridges with spring checks, 4-arm handles, 3/8" NPT female inlets and outlet Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF372. Meets ADA ANSI/ICC A117.1 requirements. -
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
Made of chrome-plated brass, this 6″ elevated swing nozzle, has a height of 24-1/16", stream regulator outlet, and 1/2" NPSM male inlet to withstand any corrosion. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Made of chrome-plated brass, this 6″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
SPECS OF 1-1/4" TOP CAP Product Number: CAMBIA-M020-0082Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 216 g (0.48lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF 1-1/4" JAW SLIDE Product Number: CAMBIA-M020-0081Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 168 g (0.37lbs) Material: 316 Stainless Steel *Pin and screws included.
