Shop All
Shop All
-
This screw is designed to be paired with CAMBIA-66109-NB — a zamak side mount deck hinge top fitting, with a 1/4"-20 threaded pin size. Lastly, this screw has a 304 stainless steel mirror finish and a nylon oval top, being extremely durable for long-term use without corrosion. -
This simple, yet functional pad eye is designed for a #8 (5mm) screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This simple, yet functional pad eye is designed for a #19 screw. Weighing a total of 8 grams (excluding packaging), it has a diameter of 0.20" with a height of 0.67" and length of 1.98". Lastly, this pad eye is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
This replacement deck fill key is suitable for deck fills with a slotted key surface of 1-3/16" hole-to-hole distance. This key is also a polished mirror finish of 316 Stainless steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66060 -
This quick release pin is suitable for all of Cambia’s top fittings with a 1/4″ pin size. The pin itself, is 304 stainless steel-formed—being extremely durable for long-term use without corrosion. If you wish to purchase other quick release pins please check the related products section below. -
These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accommodate transom thickness. This eye nut is suitable for a 3/8″ thread and has an overall height of 1-7/8″. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
The Round End Cap is designed for 1-3/4” Rub Rail and has a total length of 2-1/4". The outer diameter is also 1-7/8" and requires one(1) #10 fasteners for installation purposes (not included). Lastly, this highly polished Round End Cap is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. *Fasteners not included -
These threaded eye nuts are designed to be screwed onto various lengths of threaded stock or bolts to accommodate transom thickness. This eye nut is suitable for a 1/2" thread and has an overall height of 1-7/8". Lastly, these eye nuts are formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion.
-
This Deck Hinge has a flat base, but can be paired with a concave adapter if needed. When mounted, this deck hinge will have a 90 degree angle from its surface, and will require two #10 fasteners upon installation. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This quick release pin is suitable for all of Cambia's top fittings with a 1/4" pin size. The pin itself, is 304 stainless steel-formedl—being extremely durable for long-term use without corrosion. Lastly, there is also a 6" nylon-coated lanyard included. If you wish to purchase this quick-release pin without the lanyard (MH-15) please click here. -
This marine single drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, with a total width of 4-1/6". Finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
Elevate your boat's safety and aesthetics with our Stanchion Cap. Meticulously crafted using investment casting from premium 316 stainless steel, this cap offers durability and a sleek appearance. Designed to fit a 1” (25.4mm) outer diameter tube with a 1/4” (6.3mm) hole diameter, it includes 1/4-28 set screws for easy installation. Enhance your vessel's look and security with its mirror finish. SKU: 66188 -
SPECS OF 3/4″ TOP CAP Product Number: CAMBIA-M020-0044Y Tube Size: 3/4”(19.05mm) Pin Size: 1/4″ (6.3mm)* Weight: 90g (0.20lbs) Material: 316 Stainless Steel *Pin is not included. -
This Deck Hinge has a concave base suitable for 7/8" round tubing or any other concave surface -- for a 90 degree angle when mounted with #10 fasteners. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners & pin are not included. -
This Angled Deck Hinge has a flat base suitable for any applicable surface and requires two(2) #10 fasteners upon installing. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20, MH-15 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This Marine Bow and Stern eye weigh a a total of 157 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 4-1/2″, the diameter and length of threading is 3/8″ and 3″ respectively, with 1-7/16″ stud hole centres. This product is also completed with two plates : 2-1/4" x 3/4" ( plate 1), 2-3/4" x 1-1/4" ( Plate 2 ). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
SPECS OF 7/8" TOP INSERT EYE END Product Number: CAMBIA-66115 Tube Size: 7/8" (22.2mm) Pin Size: 5/16" Inner wall: 0.65" Weight: 60g (0.14lbs) Material: 316 Stainless Steel *Pin is not included. -
SPECS OF 1″ OPEN JAW SLIDE Product Number: CAMBIA-66089 Tube Size: 7/8”(22.2mm) Bolt Size: 1/4”-20(6.3mm-20)* Weight: 90 g (0.20lbs) Material: 316 Stainless Steel *Bolt not included -
This marine double drink holder is made of 316 stainless steel with a mirror finish for high shine and durability. With an inner diameter of 3-5/16 inches, it will fit most cup sizes, and finally, this drink holder comes with stainless steel fasteners for mounting on the deck near the seating area. -
This Deck Hinge has a flat base suitable for any applicable surface that requires a 90 degree angle when mounted. Please note, the #10 fasteners (2) are not included. However, this hinge is provided with a 1/4”-20 (6.3-20mm) stainless steel bolt. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This round header side mount is designed to be used as an alternate to our standard side mount deck hinge. It also can be used as a mounting bracket to windshield for mirrors at a 90 degree angle. Weighing a total of 86 grams (excluding packaging), it is also designed for the 66BSC.25 or 66WSC.25 1/4”-20 pin and #10 (2) fastener (not included). Lastly, this side mount is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. * Pin and fasteners are not included -
The 316SS Round Header Side Mount is designed to be used as an alternate to our standard side mount deck hinge. It also can be used as a mounting bracket to fit windshield for mirrors up to 0.60" in width. Weighing a total of 86 grams (excluding packaging), it is also designed for the 66BSC.25 or 66WSC.25 1/4”-20 pin and #10 (2) fastener (not included). Lastly, this side mount is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. Pin and fasteners are not included
-
Out of stock
The 66109-NB Deck Hinge Side Mount Top Fitting has a flat base suitable for any applicable vertical surface (wall) and requires two(2) #10 fasteners upon installing. Although the fasteners are not included, this hinge is designed for 66BSC.25 small black knob with a 1/4”-20 (6.3-20mm) thread. Lastly, this deck hinge is 316SS, being extremely durable for long-term use without corrosion. *fasteners are not included. -
SPECS OF MODIFIED 7/8″ JAW SLIDE WITH BOLT Product Number: CAMBIA-66100-M Tube Size: 7/8”(22.2mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 100 g (0.22lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF 7/8″ TOP CAP Product Number: CAMBIA-66101-M Tube Size: 7/8″ (22.2mm) Pin Size: 1/4″ (6.3mm)* Weight: 100g (0.22lbs) Material: 316 Stainless Steel Manufacturing Process: Investment Cast *Pin is not included -
This keyless toggle cap is suitable for deck fills with a 1.5" hose. Chain included. Certified to ASTM CF8M A351, Non EPA Compliant -
This 60 degree rectangular base rail fitting is designed for 1″ O.D. tubing and is completed with 1/4-28 stainless steel set screw for installation purposes. Weighing a total of 220g grams (excluding packaging), it is also has a base dimension of 3.2" x 1.8" (89mm x 48mm). Lastly, this base rail fitting is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. -
SPECS OF 1" TOP INSERT EYE END Product Number: 66120 Tube Size: 1" (25.4mm) Pin Size: 5/16"* Inner wall: 0.065" Weight: 84g (0.19lbs) Material: 316 Stainless Steel *Pin is not included. -
This Deck Hinge has a flat base suitable for any applicable surface that requires a 90 degree angle when mounted. Although the fasteners and pin are not included, this hinge is designed for 1/4”-20 (6.3-20mm) pin of MH-20 or PIN.20. Please note that a bolt cannot be inserted as there is no threading in the hole. Lastly, this deck hinge has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners are not included. -
This grab handle has 7/8″ round tubing, with an overall length c/c of 6″ — suitable not only for boats, but also any docks or decks that need extra support. Please note, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is formed with 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
SPECS OF 1" OPEN JAW SLIDE Product Number: CAMBIA-66189 Tube Size: 1”(25.4mm) Bolt Size: 1/4”-20(6.3mm-20)* Weight: 95 g (0.21lbs) Material: 316 Stainless Steel *Bolt not included -
This Take Apart Deck Hinge, has a 3-3/4" length and 2" width when mounted with four (4) #10 fasteners (not included). Lastly, this hinge is investment cast, 316 stainless steel mirror finish—being extremely durable for long-term use without corrosion. *fasteners are not included. -
This rubber doe spray face has a 1.15 GPM spray valve flow and designed for the B-107 spray valve. Made in the USA. -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Weighing a total of 0.22lbs, this straight gas fuel vent has a 3/4" hole size with a 9/16" hose. Including the screens, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This jaw slide is designed for 7/8″ O.D. tubing and is completed with a stainless steel set screw for installation purposes. Weighing a total of 100 grams (excluding packaging), there also includes a 1/4”-20 (6.3mm-20) stainless steel pin. Lastly, this jaw slide is investment cast 316 Stainless Steel mirror finish, being extremely durable for long-term use without corrosion. *Pin and screws included. -
This cap and chain is suitable for deck fills with a slotted key for optimal cap removal. The replacement key is sold separately. (CAMBIA-66060) Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66074 -
This Marine Bow and Stern eye weigh a a total of 342 grams (excluding packaging), and comes with adjustable finished nuts and the rolled threads. Being a total length of 6", the diameter and length of threading is 1/2" and 4" respectively, with 1-7/8" stud hole centres. This product is also completed with two plates : 3" x 3/4’ ( plate 1), 3-1/2" x 1-1/4" ( plate 2). Lastly, this bow and stern eye has a 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. Completed with stainless steel large and small plates and nuts. -
SPECS OF DOUBLE SET SCREW 7/8" TOP CAP Product Number: CAMBIA-M021-0031Y Tube Size: 7/8”(22.2mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 96 g (0.21lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF 1" JAW SLIDE WITH BOLT Product Number: CAMBIA-66102 Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 110 g (0.24lbs) Material: 316 Stainless Steel *Pin and screws included. -
The T&S 7861-45 gray rubber bumper is an ideal replacement for the one that came with B-0107 spray valves. If you notice tears forming in the spray valve bumper, it's a good idea to replace it. Otherwise your plates and glassware could be damaged during cleaning. -
Out of stock
SPECS OF DOUBLE SET SCREW JAW SLIDE Product Number: CAMBIA-M021-0030Y Tube Size: 7/8”(22.2mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 100 g (0.22lbs) Material: 316 Stainless Steel *Pin and screws included. -
SPECS OF DOUBLE SET SCREW 1" TOP CAP Product Number: CAMBIA-M021-0033Y Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 116 g (0.26lbs) Material: 316 Stainless Steel *Pin and screws included.
-
Enhance your boat's windshield stability with our Adjustable Windshield Brace. Expertly crafted through investment casting in premium 316 stainless steel, this brace offers durability and a sleek design. With a length that adjusts from 9.5" to 11" and a choice of widths : Foot base width is 3/4" for mounting to deck platform; top foot is 15/16" width for mounting to windshield frame, it's a versatile solution for secure windshield support. Please note that #8 fasteners (2) are not included. Elevate your vessel's appearance and functionality with its mirror finish. SKU:665106 -
Out of stock
Designed for sailboats or powerboats, the purpose of this lifeline base is used to secure a lifeline or other rigging to the deck. Please note, four #10 oval head screws are needed for installation. Lastly, this highly polished lifeline base is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This Heavy Duty Deck Hinge has a flat base and a 90 degree angle when mounted with 1/4" (2) fasteners. Although the fasteners and pin are not included, this hinge is designed for our #88BSC.1 large black knob with a 5/16”-18 (8mm) thread. Lastly, it has a 316 stainless steel mirror finish, being extremely durable for long-term use without corrosion. *fasteners and pin are not included. -
This pelican hook is perfect for any boat requiring the securing a lifeline in a safe and secure way. It is investment cast made with 316 stainless steel for maximum corrosion resistance and durability. This hook is also completed with a stainless steel Quick Release link. -
Out of stock
SPECS OF DOUBLE SET SCREW JAW SLIDE Product Number: CAMBIA-M021-0032Y Tube Size: 1”(25.4mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 130 g (0.29lbs) Material: 316 Stainless Steel *Pin and screws included.
-
This bow form mounts at 110 degrees and comes complete with a 28 set of 1/4″ screws for installation purposes. Weighing 0.77 pounds (excluding packaging), this boat hand rail has a 1″ O.D. tubing. Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This chrome-plated metal lever handle is in the blue index (cold) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This chrome-plated metal lever handle is in the red index (hot) for all standard T&S Eterna and Cerama cartridges. Screw is included. -
This grab handle has 7/8" round tubing, with an overall length of 9.5" -- suitable not only for boats, but also any docks or decks that need extra support. With flanged ends, this grab handle is only suitable for completely smooth surfaces upon installing. Lastly, this handle is 304 stainless steel mirror finish, being extremely durable for long-term use without corrosion. -
Enhance the functionality and aesthetics of your boat with our 316SS Hawse Pipe.- Crafted using investment casting.
- Features a durable 316 stainless steel construction and a sleek mirror finish.
- Flange size of 5.5" x 2.5" (140x64mm) and Interior hole of 1.5" x 3.75" (38x95mm), offers easy mooring and rope management.
- 0.88" (22mm) deep and includes #10(4) fasteners for secure installation.
-
The 316SS Angled Waste Deck fills has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage . This deck fill design is also very flush, with a flange diameter of 3" and a polished mirror finish of 316 Stainless Steel. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0135Y -
SPECS OF 1-1/4" JAW SLIDE Product Number: CAMBIA-M020-0081Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 168 g (0.37lbs) Material: 316 Stainless Steel *Pin and screws included. -
This Water Deck Fill has a slotted key for optimal cap removal and a hose size of 1-1/2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2″ and 3 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125 -
The Angled Water Deck Fill has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange diameter of 3" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-0075Y -
The Angled Waste Deck Fill in Black has a slotted key for optional cap removal with a 30 degree angle for easier installation. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The colour and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a cable, ball and spring to be installed to the hose body. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-35YBLK -
The Angled Diesel Deck Fill in Green has a slotted key for optional cap removal with a 30 degree angle for easier installation. The design is also very flush, with a flange thickness of 3″ and a finish of 316 Stainless Steel. The colour and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a cable, ball and spring to be installed to the hose body. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-36YG -
The Angled Water Deck Fill in Blue has a slotted key for optimal cap removal with a 30 degree angle for easier installation. The hose has a male hose connection with an outer diameter of 1-1/2" and 3 surface ridges to prevent any slippage. The design is also very flush, with a flange thickness of 3" and a finish of 316 Stainless Steel. The color and symbol coded on the stamping plates also meets CE and NMMA standards. Lastly, this product is shipped complete with a stainless steel cable/chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-75YB -
Enhance your boating experience with our high-quality Angled Gas Deck Fill designed for durability and convenience.- Corrosion-resistant 316 stainless steel using investment casting.
- Features a secure chain.
- 30-degree angle.
- Suitable for 1-1/2" hoses.
- 3" Flange minimizing the risk of leaks.
-
Suitable for all T&S Faucets, this chrome-plated removable RTC Eterna insert is made to last with washer included Certified to NSF 61-Section 9 and NSF 372. -
Suitable for all T&S Faucets, this chrome-plated removable LTC Eterna insert is made to last with washer included. Certified to NSF 61-Section 9 and NSF 372. -
The Water Deck Fill with toggle cap is different from most deck fills sold on Cambia-Distribution as it does not require a key for for cap removal. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. With a hose size of 1-1/2″,the design of this deck fill is flush, with a flange diameter of 3″ and a polished finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and a chain/cable to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66125TC -
The 2" Pipe Gas Deck Fill has a slotted key for optional cap removal and a finish of 316 Stainless Steel. The hose has female threaded connection with an inner diameter of 2" and height of 1.5". The design is also very flush, with a flange thickness of 4.0″ and is shipped complete with a cable, ball, and spring to be installed to the hose body.Certified to ASTM CF8M A351, Non EPA Compliant
SKU: 66131 -
SPECS OF 1-1/4" TOP CAP Product Number: CAMBIA-M020-0082Y Tube Size: 1-1/4”(31.7mm) Pin Size: 1/4”-20(6.3mm-20)* Weight: 216 g (0.48lbs) Material: 316 Stainless Steel *Pin and screws included. -
Enhance the reliability of your equipment with our Side Mount Deck Hinge. Crafted through investment casting, these fittings offer remarkable strength in 316 stainless steel. With a sturdy base measuring 1.9" W x 2.8" L (48x71mm) and a 5/16”-18 (8mm) hole size, these fittings ensure secure fastening. Note: Fasteners not included. SKU: 66213 -
The 1.5" Pipe Gas Deck Fill has a slotted key for optimal cap removal and a polished mirror finish of 316 Stainless Steel. The hose has female threaded connection with an inner diameter of 1.5" and height of 1.5". The design is also very flush, with a flange diameter of 3.5″ and is shipped complete with a stainless steel key, and cable/chain to be installed to the hose body and cap.Certified to ASTM CF8M A351, Non EPA Compliant
SKU: 66031 -
Gas vents allow the flow of air to and from the tank as levels and temperature changes. The importance of gas vents such as quality is important to prevent blow-back when filling up the tank, and vacuum build-up when gas leaves the tank. Having a very flush design, this 90° gas fuel vent has a 1-1/2" hole size, max hull thickness of 7/16" and a hose size of 9/16″. Including the screen and 2 cups, this highly polished vent is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This Folding Step is suitable for any sort of car, boat, RV, trailer, etc. that requires an additional boarding step. This folding step is also non-slip and 316 Stainless Steel investment cast—being extremely durable and stable for long-term use without corrosion. -
This boat hand rail mounts at 90 degrees and comes complete with a 28 set of 1/4" screws for installation purposes. Weighing 0.90 pounds (excluding packaging), this boat hand rail has a 1" O.D. tubing and total height of 1-1/4". Lastly, this highly polished boat hand rail is investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. -
This stainless steel 3" flat strainer fits inside a 3 1/8" drain valve.
-
This adjustable drink holder is very good quality - made of 304 stainless steel and very easy to clean. It can be easily installed on any applicable surface and folded to save space when not in use. Although this product is sold in the marine division of Cambia-Distribution, this drink holder can also be used for cars, RVs, trolleys, wheelchairs, etc. -
This Diesel Deck Fill has a slotted key for optimal cap removal and a hose size of 2" for installation purposes. The hose has a male hose connection with an outer diameter of 1-1/2" and 6 surface ridges to prevent any slippage. The design of this deck fill is flush, with a flange diameter of 3-1/2" and a mirror finish of 316 Stainless Steel. Lastly, this product is shipped complete with a stainless steel key, and chain to be installed to the hose body and cap. Certified to ASTM CF8M A351, Non EPA Compliant SKU: 66395 -
The Vented Gas Deck fill has a twist cap, which allows for easy opening with finger indents. There is also a slotted key for optimal cap removal. The hose design also allows for OEM installer to pressure test to marine standards prior to install to boat deck. Thus, saving you on labor costs! Certified to ASTM CF8M A351, Non EPA Compliant SKU: M024-73VRC -
This 8" Euro Boat Cleat features a European style and includes nuts and washers for installation purposes. Please note, the stud length 2-1/4", with a size of 1/2". Lastly, these cleats are also highly polished investment cast 316 stainless steel—being extremely durable for long-term use without corrosion. nuts and washers included. -
Are the clips of your MirOil Filter Pot worn out? If so, Cambia-Distribution recommends the Clip Repair Kit (SKU: SP/209-000SC). This kit can easily replace any broken, or malfunctioning clips on your MirOil Filter Pot.* Thus, saving you the cost of buying a brand new Filter Pot! -
Universal repair kit for 3" or 3 1/2" T&S waste valves with twist or lever handle. Included in Kit- Elastomer gaskets & washers
- O-rings
- Plastic bushing
- Stainless steel C-ring
-
Standard-type T&S B-107 spray valves can be repaired with these parts to ensure GPM output accuracy.
Included in Kit:
- Valve stem
- Spring
- Washers
- Packing seal
Certified to NSF 61-Section 9 and NSF 372. 2019 DOE PRSV - Class II compliant.
-
The purpose of the crank handle (SP/PPU125-090S), is for the user to crank filtered oil (clockwise) into your fryer at approximately 25lbs per minute. In addition, this handle has the ability to pump old oil from your fryer(counter-clockwise), into your MirOil filter pot to be disposed. -
Sale!
Upgrade your boating experience with our Premium 2-Step Over Platform Ladder. Crafted from high-quality 304 stainless steel and equipped with heavy-duty 6" Gudgeons, this ladder is designed for easy mounting on top of your swim deck. It features noise-dampening nylon treads and polymer-lined tubing for a peaceful entry into the water. Certified to ASTM CF8M A351 standards, this ladder offers safety and durability you can trust. SKU: 3205.OV2
-
The purpose of the male coupler (SKU: SP/PHF025-063C) in a MirOil filter pump, is to connect the hose (discharge or suction) to the female coupler. To save money, Cambia recommends also replacing the washer component of the female coupler for better fitting. -
Made of chrome-plated brass, this 12″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Chrome-plated brass 2" NPT female x 1 1/2" NPT male adapter for rotary waste valve.
-
Fry Quality Assurance Test Kit for Alkaline Contaminant Material in frying oils. 12 unit test determines proper dose of FryPowder or FryLiquid in oil. -
Upgrade your vessel's rope management system with our Rope and Deck Pipe. Crafted through investment casting in premium 316 stainless steel, this pipe combines durability and elegance. Designed with a pipe size of 3.8” x 2.5” (97mm x 64mm) and hole requirement of 4.1” x 2.8” (104x71mm), it offers seamless rope passage. Secure installation is ensured with #10 fasteners. *not included* SKU: 66008 -
Made of chrome-plated brass, this 6″ swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Out of stock
Made of chrome-plated brass, this 18" swing nozzle with stream regulator outlet will withstand any corrosion and is certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372.
-
This waste drain twist handle is made out of thermoplastic and stainless steel to withstand corrosion. -
MirOil LF101 FryLiquid naturally restores the antioxidants in your frying oil, extending its freshness and quality. As frying begins, the antioxidants added by oil producers start to break down, leading to degraded oil. MirOil FryLiquid prevents this by stabilizing the oil, removing trans fats and oxidants, reducing smoke, foam, and carbon buildup. It also ensures food cooks faster with less oil absorption, improving fried food quality. Suitable for any fry oil, it's essential for restaurants, hotels, and commercial kitchens, helping you save on oil and energy while promoting healthier cooking. -
Wondering if your frying oil needs changing? This MirOil PCM test kit measures the oil's total polar contaminated material for easy adjustment of oil quality levels. More specifically, it quantifies the breakdown of oil and non-oil substances, as to the aging of your deep frying oil. Thus, allowing you to monitor and make the right decisions at the right time.This product is evidently a lifesaver in optimizing the use of your frying oil in restaurant kitchens and other food service environments. -
Out of stock
The D1217.S3 Frymaster Filter Paper sheet includes 100 filter papers in each pack. It is also made out of standard flow synthetic non-woven material and by filtering everyday, you could save up to 30% on oil cost! -
Polished chrome-plated 18" riser with 3/8" NPT male threads for T&S pre-rinse units. Certified to NSF 61-Section 9 and NSF 372. -
Sale!
Elevate your water access experience with our Over-Platform 3-Step Boat Ladder featuring a convenient grip handle. Designed for easy mounting on top of a swim deck, it includes heavy-duty 7" Gudgeons. Crafted from premium 304 stainless steel, this ladder boasts noise-dampening nylon treads and polymer-lined tubing for quiet and comfortable access to the water, all certified to ASTM CF8M A351 standards. SKU: 3205.OV3WH -
The MirOil RCONE2B replacement filter bag is a component of the EZ FLOW Series (CONE2B) filter system. This filter bag is also suitable for heavy crumb loads and features the ability to safely and quickly filter oil at frying temperatures, without leaching harmful chemicals into your oil! -
The MirOil DF3A filter frame is a convenient tool for filtering food waste from deep fryer oil using either the MirOil RD44Ps or RCONE2B filter bags (not included) reducing both labor and paper costs. -
The MirOil BF1A filter frame is a convenient tool for filtering food waste from deep fryer oil using either the MirOil RB6Ps or RB5Fs filter bags (not included) reducing both labor and paper costs. -
MirOil L104 Bulk FryPowder, with up to 80 size "B" packs and 100 size "C" packs, enhances taste, appearance, and cooking speed. Save up to 40% of oil, boost fryer efficiency, and maintain spotless equipment. Acting as a natural antioxidant and filter aid, it prevents gradual food quality degradation, working continuously throughout frying for premium oil performance. Recommended every 5-8 hours or before each session, FryPowder is your key to elevated frying experiences Photo shows Optional L103 (special order) -
The D1324.S5 Pitco Filter Paper Sheet includes 100 filter papers in each pack. This filter is made out of 54 pound creped filter paper material and by filtering everyday, you could save up to 30% on oil cost!
-
The MirOil CF2A filter frame is a convenient tool for filtering food waste from deep fryer oil using either the MirOil RC88PS or CF77FS filter bags (not included) reducing both labor and paper costs. -
Sale!
Discover the ultimate water access solution with our 3-Step Under Platform Ladder. Crafted from premium 304 stainless steel with a mirror finish, this ladder is designed to mount seamlessly under your swim platform or boat. Its noise-dampening nylon treads and polymer-lined tubing ensure a quiet, comfortable ascent. Certified to ASTM CF8M A351 standards, it comes complete with slide mount gudgeons and a ball and strap for secure positioning. -
Out of stock
The MirOil RD44Ps replacement filter bag is a component of the EZ FLOW Series (D44Ps) filter system. This filter bag features the ability to safely and quickly filter oil at frying temperatures, is suitable for heavy crumb loads, and does not leach harmful chemicals into your oil! -
Quarter turn, Eterna compression cartridge, LTC (COLD) with spring check, lever handle, blue index and screw. Fits all newer T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Quarter turn, Eterna compression cartridge, RTC (HOT) with spring check, lever handle, red index and screw. Fits all T&S faucets. Certified to NSF 61- Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
The MirOil RB5Fs replacement filter bag is a fine mesh pore filter of the MirOil Polishing Filter Series. This filter bag captures micron particle sizes and features the ability to safely filter oil at frying temperatures, without leaching harmful chemicals into your oil! Suitable for -
FryPowder P36B contains oil stabilizer which is a 100% natural Antioxidant. The purpose of this product is to prevent oil breakdown reactions while cooking, as well as:- Saving oil (up to 40%)
- Less Energy used
- Food Centre cook hotter
- Fryer remain spotless
-
This 6” wall bracket has a polished brass body, and screws are included for mounting purposes. Fits 3/8" pipe and has a 2 1/4" wall flange, made in China. -
44" flexible stainless steel hose, 7/8-20 UN female outlet and 3/4-14 UN female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Out of stock
The D2150.D4 Renu Disc Paper filter includes 100 filter papers in each pack. By filtering everyday, you could save up to 30% on oil cost! This filter is also made out of 44 pound creped paper material, ideal for Mary Brown's Franchises. -
The purpose of the female coupler in a MirOil filter pump, is to connect the hose (discharge or suction) to the male coupler. To save money, Cambia recommends also replacing the washer component of the female coupler for better fitting vs. replacing the entire female coupler. -
The MirOil RC88Ps replacement filter bag is a component of the EZ FLOW Series (C88Ps) filter system. This filter bag features the ability to safely and quickly filter oil at frying temperatures, is suitable for heavy crumb loads, and does not leach harmful chemicals into your oil! -
Sale!
Elevate your boating experience with our 4-Step Boat Ladder with Handle. Designed for easy mounting on top of a swim deck, it includes heavy-duty 4.5" Gudgeons. Crafted from high-quality 304 stainless steel, this ladder features noise-dampening nylon treads and polymer-lined tubing for quiet, comfortable, and secure access to the water. Certified to ASTM CF8M A351 SKU: 3205.OV4FG -
T&S Pre-Rinse Overhead Spring 888-45, made of chrome-plated steel and measuring 20-5/16" long with a country origin in China, is used by many end users for its sturdy structure.
-
44" flexible stainless steel hose, chrome-plated brass 3/4-14 UN female outlet and inlet, and gray thermoplastic handle. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Acting as a natural antioxidant and filter aid, MirOil L106 Bulk FryPowder prevents gradual food quality degradation, working continuously throughout frying for premium oil performance. Recommended every 5-8 hours or before each session, FryPowder is your key to elevated frying experiences. -
In industrial kitchens, the B-107 spray valve is designed for heavy-duty use— with a 1.15 GPM spray valve flow and a doe spray face. There is also a 3/4-14 UN male inlet, a hold down ring and shuts off when handle is released. Made to last, this product has a polished chrome-plated brass body and a rubber bumper.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. EPAct 2005 compliant. -
The MirOil D900B replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil! -
MirOil LF301 FryLiquid naturally restores the antioxidants in your frying oil, extending its freshness and quality. As frying begins, the antioxidants added by oil producers start to break down, leading to degraded oil. MirOil FryLiquid prevents this by stabilizing the oil, removing trans fats and oxidants, reducing smoke, foam, and carbon buildup. It also ensures food cooks faster with less oil absorption, improving fried food quality. Suitable for any fry oil, it's essential for restaurants, hotels, and commercial kitchens, helping you save on oil and energy while promoting healthier cooking. -
In industrial kitchens, the B-107C low flow spray valve is designed for heavy-duty use—with a 3/4-14 UN male inlet, a hold down ring and shuts off when handle is released. Made to last, this product has a polished chrome-plated brass body and a rubber bumper.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. EPAct 2005 compliant. -
Out of stock
Made of chrome-plated brass, this 6″ elevated swing nozzle, has a height of 24-1/16", stream regulator outlet, and 1/2" NPSM male inlet to withstand any corrosion. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
The MirOil FM1812B replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil!
-
The MirOil FPT1812B replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil! -
Out of stock
The MirOil D44Ps Filter Assembly is a convenient tool for filtering food waste from deep fryer oil using the MirOil RD44Ps filter bags (included) reducing both labor and paper costs. -
The MirOil B6Ps Filter Assembly is a convenient tool for filtering food waste from deep fryer oil using the MirOil RB6Ps filter bags (included) reducing both labor and paper costs. -
The DN1122B replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil! -
Out of stock
The F919B replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil! -
MirOil F919BQ replacement filter bag is a retro-fit basin filter for gas or electric fryers with drain valves only. This filter bag also features the ability to improve the performance of built-in filter machines, and does not leach harmful chemicals into your oil! -
The MirOil B5Fs Filter Assembly is a convenient tool for filtering food waste from deep fryer oil using the MirOil RB5Fs filter bags (included) reducing both labor and paper costs. -
Out of stock
The MirOil PUM11B replacement filter bag is a pump-out filter for 2-way pump machines and electric fryers with lift-out elements. -
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
This mobility baseis designed for easy and safe transportation of the 60L filter pot. The material is of durable metal with four heavy duty casters to withstand daily use in your busy commercial kitchen. -
This mobility base is designed for easy and safe transportation of the 40L filter pot. The material is of durable metal with four heavy duty casters to withstand daily use in your busy commercial kitchen. -
68" flexible stainless steel hose with heat resistant handle, 3/4-14 UN female outlet and 3/4-14 UN female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Upgrade your boating experience with our 4-Step Boat Ladder with Sliding Gudgeons for easy movement. Crafted from high-quality 304 stainless steel, this ladder is designed for front boat installation or concealed beneath a fiberglass cover. The nylon treads and noise-dampening polymer-lined tubing ensure a quiet and comfortable boarding experience. Certified to ASTM CF8M A351 standards, it's a reliable addition to your boat. SKU: 3205.OPS4
-
Out of stock
This add-on faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few features include:- Chrome-plate brass body
- 12″swing nozzle with stream regulator outlet
- Ceramic cartridge with check valve
- Lever handle
- 3/8" NPT male and female inlet
-
Enhance your boating experience with our Premium 4-Step Sliding Boat Ladder. Designed for easy mounting to the underside of your swim platform or boat, this ladder includes slide mount gudgeons and a secure ball and strap mechanism. Crafted from high-quality 304 stainless steel, it features noise-dampening nylon treads and polymer-lined tubing for quiet and comfortable access to the water. Certified to ASTM CF8M A351 SKU: 3208.UN4 -
The D1820.E5 Pitco Filter Paper Envelope includes 100 filter papers in each pack. This filter is made out of 54 pound creped filter paper material and by filtering everyday, you could save up to 30% on oil cost! It is also recommended to pair this product with MirOil's Frypowder Oil Stabilizer/Filter Aid. -
Out of stock
Outstanding quality and craftsmanship is evident in this single pantry faucet. Chrome-plate brass body, swivel outlet with 18" 65X nozzle (with stream regulator outlet), compression cartridge with spring check, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
- For safe storage and transport of up to 6 gallons (21L) of oil.
- Silicone-gasketed lid with quick locking clips
-
Outstanding quality and craftsmanship is evident in this concealed mixing faucet. Chrome-plate brass body, compression cartridges with spring checks, 4-arm handles, 3/8" NPT female inlets and outlet Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF372. Meets ADA ANSI/ICC A117.1 requirements. -
Meet the MirOil 40L Oil Filter Pot — an efficient solution for hot grease and oil handling with a low profile to easily fit under drain valves. With a 35 lb (19L) oil capacity, it’s perfect for high-volume frying. Compatible with EZ-FLOW and OIL POLISHING Filters, the 40LC is versatile and adaptable to various filtration needs. Simplify your kitchen operations with the convenience and functionality of the MirOil 40L. The filter bag and frame is not included.
SKU: 40L -
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, swivel outlet (less nozzle), compression cartridge with spring check, lever handle, 18" flexible stainless steel supply hoses, and 1/2" NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
The 60L filter pot is designed for the safe filtering and handling of hot grease and oil. It also has a low profile that fits under drain valves. To clarify, the filter bag and frame is not included*. However, there are a variety of applicable filters for this filter pot. -
Out of stock
Outstanding quality and craftsmanship is evident in this 8" wall mount mixing faucet. Chrome-plate brass body, 12" swing nozzle, ceramic cartridge faucets, lever handles, 1/2" NPT female inlets. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
This hand-held pot and kettle filler is made of chrome-plated brass and stainless steel for increased durability. Other features include:
- Automatic shut-off valve
- Heat resistant handle
- Hook nozzle
- 68" flexible hose
- 1/2" NPT male inlet.
-
Wall mount pot filler with chrome plated brass body, 18" double joint swing nozzle, on-off volume control outlet with insulated grip, 1/2" NPT female inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. -
Out of stock
Outstanding quality and craftsmanship is evident in this double pantry faucet. Chrome-plate brass body, 12″ swing nozzle (with stream regulator outlet), compression cartridge with spring check, 18" flexible stainless steel supply hoses, lever handle, and 1/2″ NPSM male inlet. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements. -
Out of stock
This deck mount double pantry faucet features outstanding quality to ensure lasting durability and protection against corrosion. A few key features include:
- Chrome-plate brass body
- 18"swing nozzle with stream regulator outlet (65x)
- Compression cartridge with spring check
- Lever handle
- 18" flexible stainless steel supply hoses
- 1/2″ NPSM male inlet
-
Meet the MirOil 40LC Oil Filter Pot with Casters—an efficient solution for hot grease and oil handling. Its low profile easily fits under drain valves, and the caster base ensures smooth mobility. With a 35 lb (19L) oil capacity, it's perfect for high-volume frying. Compatible with EZ-FLOW and OIL POLISHING Filters, the 40LC is versatile and adaptable to various filtration needs. Simplify your kitchen operations with the convenience and functionality of the MirOil 40LC. SKU: 40LC
